The FDW62 dehumidifier is a purpose-built elegant but powerful dehumidifier ideal for corrosive environments including indoor heated pools, laboratories, etc. This dehumidifier is powder-coated inside and outside at the factory and receives an additional internal rust protection treatment before leaving our workshop. Not all dehumidifiers available in Australia are finished to this standard.
The large volume of dry air this unit is capable of producing (600m³/hr) ensures the area is kept at optimal humidity levels. This model can be fitted with a water pump to allow collected water to be pumped to a remote point – very handy!
- Pump can be fitted for lifting condensed water
- Two speed fan
- Digital control of humidity and defrost
- Digital display
- Protection IP22 (added protection for corrosive areas)
- Low noise
- Low power consumption
- Rotary compressor
- Power supply 220-240V 50Hz
Warranty: 2 years
CONDENSED WATER AT DIFFERENT AMBIENT TEMPERATURE AND HUMIDITY CONDITIONS
|10 l/d||18 l/d||15 l/d||23 l/d||20 l/d||28 l/d||25 l/d||35 l/d||28 l/d||39 l/d||52 l/d||62 l/d|
|Power Consumption (at 27˚C, 65% rh)||700 w|
|Power Consumption (at 35˚C, 95% rh)||950 w|
|Absorbed Current (at 35˚C, 95% rh) standard ver.||4.4 A|
|Start Current Full Load Amp||20 A|
|Air Flow||600 cm/h|
|Noise level (at 3 meters)||49 dB|
|Continuous Drainage Pipe (male)||19mm|
|Temperature Range standard version||7-35˚ C|
|Relative Humidity Range||45-99%|
|Condensation Capacity (at 26˚C, 60% rh)||52 l/24 hr|
|Condensation Capacity (at 32˚C, 90% rh)||62 l/24 hr|
|Dimensions||78cm x 68cm x 25cm|
Condensate pump suitable for this model is ACSO5.001
Product Enquiry:[contact-form-7 404 "Not Found"]
Steve Wile, business owner / home owner: Fral FDW62
Steve was installing a new indoor heated pool and was worried about high humidity and condensation. He owns a company that builds award winning storage units so was aware of the pitfalls of heated water, chlorine or salt and poor ventilation.
Steve has gone to some lengths to build-in good ventilation, but was worried the humidity would still build up and was concerned about rust and condensation.
Moisture Cure listened to what I was trying to achieve and recommended the FRAL.
Swan Hill Specialist School
In the first few days they ran fairly constantly, but there was a lot of moisture to absorb. Now that they have absorbed all the moisture the dehumidifiers just run for a short time and the pool area stays nice and dry. Already we can see that they will save us in maintenance costs
Anne Webb, Business Manager